0102030405
The KT9C integrated down the hole drill rig for open use
Product introduction
1. Integrated design: The compressor, hydraulic system, control system and power system are integrated into one device, reducing the equipment’s footprint and installation complexity.
2. Efficient Drilling: By integrating efficient DTH hammers and drill bits, it can drill quickly in hard rock formations and improve drilling efficiency.
3. Automated control: Equipped with a modern control system, it can realize automated operation and remote monitoring, reduce manual intervention, and improve operation safety and accuracy.
4. Versatility: Usually equipped with a variety of drill bits and drill rods to adapt to different geological conditions and drilling needs.
5. Easy to move: Compact design, usually installed on crawler tracks or wheeled chassis, making it easy to move between different working sites.
Key components
1. Diesel engine: Provides the main power of the equipment, driving the compressor and hydraulic system.
2. Compressor: Provides high-pressure air to drive the DTH hammer and remove drilling chips. The compressor capacity and pressure should meet the needs of the drilling rig.
3. Hydraulic system: Provides the main power of the equipment, including hydraulic pumps, hydraulic motors and hydraulic cylinders.
4. DTH hammer and drill bit: core drilling components, responsible for breaking rocks. Choose the appropriate DTH hammer and drill bit according to the geological conditions.
5. Drill pipe: Connects the drilling rig and drill bit to transmit power and drilling force. The length and diameter of the drill pipe are selected based on the drilling depth and diameter.
6. Control system: used to operate and monitor various parameters of the drilling rig to ensure the safety and efficiency of the drilling process.
7. Chassis: Usually crawler or wheeled design to facilitate the movement of equipment between different working sites.
Key considerations when choosing a diesel integrated surface drilling rig
1. Geological conditions: Select the appropriate DTH hammer and drill bit according to the geological conditions of the drilling area.
2. Drilling Depth and Diameter: Determine the required drilling depth and diameter to select equipment with adequate drilling capabilities.
3. Compressed air demand: Ensure that the capacity and pressure of the compressor can meet the needs of the DTH hammer.
4. Power source: Choose a suitable diesel engine to ensure that its power and fuel efficiency can meet the operating needs.
5. Automation and Control: Choose equipment equipped with modern control systems to improve operational efficiency and safety.
6. Mobility: Choose an appropriate chassis design according to the needs of the working site to ensure the ease of movement of the equipment.
Application fields
Diesel integrated surface drilling rigs are widely used in the following fields:
● Mining: Used for blast hole and production hole drilling in mining.
● Quarrying: used for drilling operations in stone mining.
● Geological Exploration: Exploration drilling for mineral resources and geological structures.
● Foundation Engineering: For drilling of pile foundations and anchor holes in construction and infrastructure projects.
| Drilling hardness | F=6-20 | size | 8250*2300*3200 |
| Drilling diameter | 115-165mm | weight | 12000kgs |
| Depth of drilling | 25m | Rotation speed of gyrator | 0-100r/min |
| Climbing capacity | <25° | Max push-pull force | 25KN |
| Method of propulsion | Roller chain | Tilt angle of beam | 125° |
| Drill rod | 76*3000mm | DTH hammer | 5” |
| Diesel engine | YCK09400-T300 | ||
| Screw compressor | 20M/min,22bar |