KT9C Integrated DTH Drill Rig for Open Use - China Suppliers & Factory for Efficient Mining Solutions
Product Introduction
The compressor, hydraulic system, control system and power system are integrated into one device, reducing the equipment’s footprint and installation complexity.
By integrating efficient DTH hammers and drill bits, it can drill quickly in hard rock formations and improve drilling efficiency.
Equipped with a modern control system, it can realize automated operation and remote monitoring, reduce manual intervention, and improve operation safety and accuracy.
Usually equipped with a variety of drill bits and drill rods to adapt to different geological conditions and drilling needs.
Compact design, usually installed on crawler tracks or wheeled chassis, making it easy to move between different working sites.
Key Components
Provides the main power of the equipment, driving the compressor and hydraulic system.
Provides high-pressure air to drive the DTH hammer and remove drilling chips. The compressor capacity and pressure should meet the needs of the drilling rig.
Provides the main power of the equipment, including hydraulic pumps, hydraulic motors and hydraulic cylinders.
Core drilling components, responsible for breaking rocks. Choose the appropriate DTH hammer and drill bit according to the geological conditions.
Connects the drilling rig and drill bit to transmit power and drilling force. The length and diameter of the drill pipe are selected based on the drilling depth and diameter.
Used to operate and monitor various parameters of the drilling rig to ensure the safety and efficiency of the drilling process.
Usually crawler or wheeled design to facilitate the movement of equipment between different working sites.
Key Considerations When Choosing a Diesel Integrated Surface Drilling Rig
Application Fields
Diesel integrated surface drilling rigs are widely used in the following fields:
| Drilling hardness | F=6-20 | Size | 8250*2300*3200 |
| Drilling diameter | 115-165mm | Weight | 12000kgs |
| Depth of drilling | 25m | Rotation speed of gyrator | 0-100r/min |
| Climbing capacity | <25° | Max push-pull force | 25KN |
| Method of propulsion | Roller chain | Tilt angle of beam | 125° |
| Drill rod | 76*3000mm | DTH hammer | 5” |
| Diesel engine | YCK09400-T300 | Screw compressor | 20M³/min, 22bar |
Frequently Asked Questions (FAQ)
The integrated design combines the compressor, hydraulic system, control system, and power system into a single unit. This significantly reduces the equipment's footprint on site and simplifies the installation process.
This diesel integrated surface drilling rig supports a drilling diameter range of 115-165mm and can reach a maximum drilling depth of 25 meters.
It features a YCK09400-T300 diesel engine and a high-performance screw compressor that delivers 20M³/min of air volume at a pressure of 22bar.
The rig is designed for efficient drilling in hard rock formations with a drilling hardness rating of F=6-20, utilizing a 5” DTH hammer.
Thanks to its compact design and crawler or wheeled chassis, the equipment is highly mobile. It features a climbing capacity of up to 25° to easily navigate rough terrains.