0102030405
KG430 dth drilling machine
Summarize
The KG430 down-the-hole drilling rig is an upgraded and improved equipment based on the national diesel engine emission requirements, designed to meet increasingly stringent environmental standards. The equipment is equipped with a Yuchai non-road four-cylinder engine to ensure its compliance in terms of emissions and environmental protection.
In terms of design, the KG430 series adopts a folded edge crawler frame and a four-wheel-one-belt structure, which enhances the leveling ability of the crawler and, in combination with the plunger travel motor, increases the working pressure, thereby improving the climbing performance. This design significantly enhances the drilling vehicle’s operating ability in complex terrain.
In order to meet the requirements of extreme positions, the KG430 series has increased the size of the pitch and lift cylinders to ensure stability and safety in various working conditions. In addition, the dual-motor slewing design increases the slewing torque and speed, improving operating efficiency. At the same time, the enlarged design of the lifting cylinder and chain further improves the lifting force and reliability of the equipment.
In terms of structure, the cover adopts a thickened profile folding design to enhance the strength and rigidity of the equipment and ensure durability under harsh working conditions. At the same time, the added lifting ring design facilitates the loading and unloading and hoisting operations of the equipment.
Application fields
The KG430 open-pit down-the-hole drilling rig is also equipped with a dust collector, which improves the environmental protection and reliability during operation, and meets the environmental protection requirements of modern construction. Overall, the KG430/KG430H drilling rig is an advanced drilling equipment that integrates high efficiency, environmental protection and reliability, and is suitable for use in various open-pit mines and stone projects.
|
Drilling hardness |
F=6-20 |
Outer dimensions(mm) |
6300*2250*2700 |
|
Drilling diameter |
90-152mm |
Travelling speed |
0-2.5km/h |
|
Depth of drilling |
25m |
Rotation speed |
0-140rpm |
|
Climbing capacity |
<30° |
Lifting force |
40KN |
|
Ground clearance |
290mm |
DTH hammer |
4” |
|
Power of machine |
162kw/2200r/min |
|